Operation - Trevi RA 742T Cuba Kurzanleitung

RA 742T
CONTROL AND THEIR FUNCTIONS
1 . T uning Knob
2. Function Knob
3 . V olume Knob
4. Battery compartment
5. LEDindicator
6. Speaker
7. Aux In jack
8 . T elescopic Antenna
BATTERY POWER OPERATION
Install 4 x "AA" batteries into the battery compartment (4)
on the backside of the device, carefully as indicated in
the battery compartment.
Removethebatterieswhendon'tusethedeviceforalongtime.

OPERATION

1 . T o turn on the device put the Function Knob (2) into
FM position.
The LEDindicator (5) will turn on.
2 . T uneinthestationyouwant
tolistenwiththeT uningKnob (1).
3. Adjust the volume usingVolume Knob(3).
4 . T oturnoff thedeviceput theFunctionKnob(2) intoOFF
position.
The LEDindicator (5) will turn off.
RECEPTION NOTE
For FM reception pull out the T elescopic Antenna (1) adjust
the direction, lenght and angle to give the best reception.
AUX IN
Connect oneendof thecableAux
totheAux In Jack (7), and the other end to the external
device.
T urn on the unit and start playback fromthe external
device. Note:
Once you have finished using unplug the
when the cable is connected the radio function is excluded.
CARE AND MAINTENANCE
This device is a high precision electronic instrument; so it's
recommendedtonot placetheradioset nearsourcesof heat,
inhumidor dustyplaces, nor exposeit directlytothesunlight.
Do not block the ventilation slits and leave a space of at least
5 cmto allow ventilation.
Cleantheradiowithadampcloth.Usingdetergents,abrasives
or solvents may damage the radio set.
TECHNICAL SPECIFICATION
Power supply:
Frequency Range:
TREVI pursues a policy of continuous research and deve-
lopment.Thereforethecharacteristicsof theproductcandiffer
fromthose in the description.
English
In(not supplied)
Aux In cable,
6V -4x"AA"batteries
not included
FM87.5-108.0 MHz