Radson PTC BLOWER 950W Bedienungsanleitung Seite 8

EN
6- Press to exit the programming Mode and return to Auto Mode.
Note: without action on the keys, it will return to Auto after a few minutes.
Choices and allocation programmes
1- If you just set the time and day, the cursor moves automatically un-
der PROG.
From Auto, Comfort, Eco or Frost protection mode, then press
for 5 seconds. When the cursor positionned under the set time sym-
bol , press again.
Version with occupancy detector:
The days of the week are all displayed. The default program Auto
Program, see page 7) appears on the display.
1 2 3 4 5 6 7
2- Press or .
The programme affected by default, Auto, flashes. It will be applied
to all the days of the week.
1 2 3 4 5 6 7
3- Chose the programme you want for this day with
Save by pressing .
4- The programme assigned to the second day of the week (Tuesday)
will flash.
Repeat the procedure described previously (in point 3) for each day of
the week.
5- Once you have chosen a programme for each day, confirm your selection by pressing
with the programmes that you set for them (P1, P2, P3, CONF or ECO).
To exit the Programming mode, press
M16MI328 A04_02/18 R
Prior information:
display area
Other version :
(Auto The days of the week will scroll on display with the programmes that
you set for them, meaning Comfort
2- Press
or .
twice.
2
1
or .
The programme set for day 1 (1= Monday, 2 = Tuesday, etc.) will flash.
1
1
1
. The days of the week will successively scroll on display
Correspondence days /
numbers
Monday 1
Tuesday 2
Wednesday 3
Thursday 4
Friday 5
Saturday 6
Sunday 7
CONF
every day.
1 2
8