Herunterladen Inhalt Inhalt Diese Seite drucken

Digital Operation - Viessmann 5172 Bedienungsanleitung

H0 rolltor mit motorischem antrieb
Inhaltsverzeichnis

Werbung

4.3 Digitalbetrieb
Dieser Decoder lässt sich als Schaltartikel ansteuern. Er
bietet aber auch den Komfort, auf einer Lokadresse ange-
steuert werden zu können. Dies kommt den Modellbahnern
entgegen, deren Zentrale keinen bequemen Zugriff auf
Schaltartikel ermöglicht.
Im digitalen Betrieb schalten Sie den Rolltorantrieb über
eine Digitalzentrale. Legen Sie als erstes eine Digitalad-
resse fest. Lesen Sie dazu die beiden folgenden Kapitel
und beachten Sie Abb. 16 für DCC oder Abb. 16.1 für MM.
Nach Festlegung der Digitaladresse schließen Sie den
Rolltorantrieb an (Abb. 15).
Sie können die Stellrichtung des Antriebs umkehren.
Schließen Sie nach der Programmierung beide blauen
Drähte gemeinsam an (Abb. 15.1): bei Märklin/Motorola
beide Drähte an den Mittelleiter; bei DCC an eine beliebige
der beiden Schienen. Alternativ können Sie die Schaltrich-
tung in der CV 36 ändern.
Abb. 15
Abb. 15.1
Connection after programming the address - use for reverse switching direction!
braun
brown
Digital-
rot
/ red
zentrale
Digital
command
station
gelb
braun
yellow
brown
braun
brown
Anschluss nach Adressprogrammierung für invertierte Stellrichtung!

4.3 Digital operation

This decoder can be controlled as an accessory decoder.
However, it also offers the option to be controlled with a
locomotive address. This is particularly useful for model-
lers who do not have a command station with easy access
to accessories.
In the digital mode of operation, you use a digital com-
mand station to control the roller shutter. Please read the
following two chapters and observe fig. 16 for DCC or fig.
16.1 for MM to learn how to set a digital address.
After setting the digital address, you can connect the roller
shutter drive (fig. 15).
You can reverse the switching direction of the drive. After
programming, connect both blue wires simultaneously (fig.
15.1): for Märklin/Motorola both wires to the neutral con-
ductor; for DCC both to either of the two rails. Alternatively,
you can change the switching direction in CV 36.
gelb
/ yellow
Digitalzentrale
Digital command station
braun
brown
DCC
Fig. 15
Mot. / DCC
Fig. 15.1
Digital-
rot
/ red
zentrale
Digital
command
station
gelb
braun
yellow
brown
braun
brown
MM
9

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis