Bosch GWS 18V-15 C Professional Originalbetriebsanleitung Seite 30

30 | English
Material Application
Metal Brushing, removing
rust
Stainless Grinding
steel
Metal Rough grinding
Metal Cutting
Stone Cutting
The values specified for speed levels are guide values.
The rated speed of the accessory must be at least
u
equal to the maximum speed marked on the power
Status indications
Battery charge indicator Meaning/cause
(user interface) (31)
Green Battery charged
Yellow Battery almost empty
Red Battery empty
Temperature indicator (37) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Power tool status indic- Meaning/cause
ator (36)
Green Status OK
Yellow Critical temperature has been reached or bat-
tery is almost empty
Illuminated red Power tool has overheated or battery is empty Allow the power tool to cool down, or replace
Flashing red Kickback shutdown, restart protection or im-
pact shutdown has been triggered
Flashing blue Power tool is connected to a mobile device or
settings are being transferred
Connectivity functions
In conjunction with the GCY 42 Bluetooth® Low Energy Mod-
ule, the following connectivity functions are available for the
power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
1 609 92A 4GB | (11.07.2019)
Application tool Speed preselection
level
Cup brush 1
Fibre disc 2
Grinding disc 3
Grinding disc 3
Diamond cutting disc 3
and cutting guide
(cutting of stone is
permitted only with a
cutting guide)
tool. Accessories running faster than their rated speed
can break and fly apart.
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42.
The connection of the power tool with the app must be con-
firmed by pressing the speed preselection button (33) on
the user interface (4). The app requests this when connect-
ing.
GWS 18V-15 SC GWS 18V-15 SC
(115/125 mm) (150 mm)
-1 -1
[min ] [min ]
3400 2600
6600 5000
max. max.
max. max.
max. max.
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
or charge the battery
Turn the power tool off and on again
–
Bosch Power Tools