Gembird ACAM-001 Benutzerhandbuch Seite 6

Press the "REC" button to start recording, Press the "REC" button again to stop video recording.
Below the videos will show " " and timer, when stopped recording, the red recording icon " " will disappear.
3.1 Video/Sport mode
Toggle switch to the SPORT mode, the device will be recorded until card is full (no loop recording).
3.2 Video/CAR model
Toggle switch to the CAR model, the device will start loop recording, you can set the cycle time in the menu (1
minute by default).
3.3 White light
When the outside light is weak, select the "night mode" from the video settings menu. This feature helps to improve
the image brightness. You can also press the power button shortly to power on the white LED lamps on the front of
the camera.
3.4 Mute / SOS function
MUTE: In video mode, press the mute button and the screen will display MIC mute icon. Press MUTE again to
disable the mute function and the mute icon will disappear.
SOS: In recording mode press SOS button for 2 seconds. This locks the current recording cycle and prevent it from
automatic deleting. The screen will display the lock screen icon.
4. Picture mode
Power on the camera and press the "
mode" mode icon " ". The camera is now in picture mode.
To take a picture, just aim the camera lens at the photo subject, press the up and down key to use the digital zoom
and press the " " button to take a photo. The camera will make a "click" sound when the photo is finished.
4.1 Self-timer
In camera mode , press the "MENU" button and use the "Down" arrow button to select the "Self timer" option. Press
the OK button to select this feature and set to set "OFF, 5 secs or 10 secs".
4.2 Laser positioning
In the preview mode, press the "
aimed correctly, just press the "
GEMBIRD EUROPE B.V. http://www.gembird.eu
FULL HD ACTION CAMERA WITH WATERPROOF CASE
" button. The upper left corner of the display will now show a "picture
" button for 2 seconds to enable the laser positioning light. If the camera is
" button again for 2 seconds to disable the laser positioning light.
ACAM-001
6