Control Panel - Sealey SPI1S Bedienungsanleitung

8.1 remove all cord wraps and uncoil the cables prior to using the battery
charger.
9. FEATURES

10. CONTROL PANEL

LED inDicAtors
PoWEr (green) LED lit: the charger is connected to Ac power.
cHArGinG inDicAtor:
Yellow/orange LED lit: the charger is charging the battery.
Yellow/orange LED flashing: The charger is in abort mode.
Green LED pulsing: the battery is fully charged and the charger is
in
maintain mode.
CLAMPS REVERSED (red) LED flashing: The connections are
reversed.
BAD BAttErY (red) LED lit: the charger has detected a problem
with the battery. see troubleshooting for more information.
notE: see operating instructions for a complete description of the
charger modes.
11. OPErAtinG instructions
IMPORTANT
Do not start the vehicle with the charger connected to the
Ac outlet, or it may damage the charger and your vehicle.
1.
2.
3.
4.
5.
7
6.
7.
• 10 •
Hook attachment
charging status
LED
Bad Battery LED
Power LED
clamps reversed
LED
Battery clamps
(quick-connect)
ring connectors
(quick-connect)