Installing The Camera; Installing The Software - Velleman CAMSETW13 Bedienungsanleitung

4. Description
1. power switch
2. channel selector
3. DC power jack
4. antenna
5. IR LEDs

5. Installing the Camera

• Wall-Mounting the Camera
Choose an appropriate mounting spot. Drive a hole in the wall and insert a
nylon plug into the hole. Insert a screw into the anchor. Hang the camera
onto the screw.
Next, connect the camera to the power adapter. Insert the power adapter into
the mains. Switch on the camera. The power LED will light.
• Setting the Channel
Select the channel through the channel selector at the back of the
camera. Make sure the receiver and the channel are both set to
the same channel.

6. Installing the Software

Insert the CD-ROM into the drive. The installation wizard will be launched
automatically. Install the USB driver, the CameraViewer software and the
MPEG4 codec, and follow the instruction windows.
Installing the Trident Analog Video software
Connect the receiver to your computer. Following window will pop up.
Choose not to update the software and follow the instruction windows to
finish the installation.
CAMSETW13
6. lens
7. PIR sensor
8. microphone
9. power LED
4 VELLEMAN