Troubleshooting; Technical Specifications - Velleman CAMSETW13 Bedienungsanleitung

8. Troubleshooting

Problem Possible Solution
I forgot the password • Uninstall the CameraViewer software and re-install it.
• Make sure both the camera and the receiver are set on the same channel.
No image display • Signal is weak. Relocate the camera.
• Switch off the interference source.
Distorted picture colour • Set the colour on your PC as 16 bits or higher.
No wireless communication • Make sure both the camera and the receiver are set on the same channel.
• Make sure both the camera and the receiver are set on the same video
Black and white or flickering image
system.
• Engage the alarm function by clicking the IR detection button/sound
Alarm does not work
detection.
• Make sure the language of the CameraViewer is identical to the language
Unreadable character display
of your computer's operating system.
Playing time of the video is much • Your computer cannot handle the frame rate. Select a lower recording
shorter than recorded time frame rate.

9. Technical Specifications

Camera
Sensor
Resolution
Viewing Angle
Min. Illumination
Transmission Frequency
Transmission Power
Modulation Type
Bandwidth
Power Supply
Motion Detection Distance
Motion Detection Area
Sound Sensitivity
Power Consumption
Transmission Range
Night Vision Range
Dimensions
Weight
Selectable Channels
Receiver
Intermediate Frequency
Demodulation Type
Sensitivity
Transmission Interface
Dimensions
Weight
CAMSETW13
CMOS
628 x 582
55°
5 lux (F1.2, IR off)
ISM 2,400MHz ~ 2,483MHz
10mW
FM
18MHz
8VDC/300mA (PSU incl.) or 3 x 1.5V batteries (order code
LR03C, not incl.)
8m
120° (H), 15° ~ 25° (V)
> 50dB
180mA (IR off), 230mA (IR on)
max. 80m in open field
5m
85 x 109 x 111mm
170g
2,414MHz, 2,432MHz, 2,450MHz, 2,486MHz
480MHz
FM
< -85dBm
USB 2.0
105 x 22 x 69mm
90g
12 VELLEMAN