Peavey GPS Serie Handbuch Seite 16

OUTPUT POWER: (Typical value)
2 Ohms, 1 kHz, .1 THD
4 Ohms, 1 kHz, .1 THD
8 Ohms, 1 kHz, .1 THD
4 Ohms, 1 kHz, .1 THD
8 Ohms, 1 kHz, .1 THD
RATED OUTPUT POWER:
4 Ohms, 20 Hz to 20 kHz,0.03% THD
8 Ohms, 20 Hz to 20 kHz,0.02% THD
SLEW RATE: (Typical value)
Stereo mode, each channel
Bridge mode, mono
INPUT SENSITIVITY and IMPEDANCE:
Input attenuator set @ FCW
@ rated output power, 4 Ohms
Unbalanced, 1/4" phone jack
Balanced, XLR (phase selectable)
Overall system gain per channel
FREQUENCY RESPONSE: (Typical)
+0,-1 dB, 1 WRMS, 4 Ohms
+0,-0.2 dB @ rated output, 4 Ohms
DAMPING FACTOR: (Typical value)
8 Ohms, 1 kHz
HUM AND NOISE:
Below rated output power, 4 Ohms
POWER CONSUMPTION:
@ 1/8 rated power @ 2 Ohms
WEIGHT:
GPS ™ 1500 SPECIFICATIONS
Stereo mode, both channels driven
- 750 WRMS per channel
- 550 WRMS per channel
- 320 WRMS per channel
Bridge mode, mono
- 1,500 WRMS
- 1,100 WRMS
Stereo mode, both channels driven
- 500 WRMS per channel
- 280 WRMS per channel
- 40 Volts per usec
- 80 Volts per usec
- 1.17 VRMS (+1 dBV)
- 20 k Ohms
- 10 k Ohms per leg
- 40X (+32 dB)
Stereo mode, both channels driven
- 5 Hz to 50 kHz
- 20 Hz to 20 kHz
Stereo mode, both channels driven
- Greater than 400
Stereo mode, both channels driven
- 100 dB, unweighted
Stereo mode, both channels driven
- 1080 Watts @ 120 VAC
- 39.2 lbs. (17.9 kg)
Specifications subject to change without notice.
16