Operation - Hatco HGSM-4060 Installations- Und Bedienungshandbuch

OPERATION

General
WARNING
Read all safety messages in the IMPORTANT SAFETy
INFORMATION section before operating this equipment.
NOTICE
Do not turn on unit until it has been cleaned thoroughly.
Ceramic glass surface must be clear of debris to prevent
burn-on.
Use only wipes, pads, and cleaners designed specifically
for cleaning ceramic glass surfaces. Using other wipes,
pads, or cleaners may damage ceramic glass surface.
Do not slide pans across glass surface, use rough-
bottomed pans, or drop anything on glass surface.
Scratching or breakage may occur. Damage to glass
surface or breakage of glass caused by misuse is not
covered under warranty.
Control Keys
Startup
BURN HAzARD: Some exterior surfaces on unit will get
hot. Use caution when touching these areas.
Shutdown
Heat Setting
Indicator Lights
CAUTION