Safety Measures; Overload Indication; Low Battery Indication - Heinner HBS-150WHP Bedienungsanleitung

www.heinner.com 150kg, 1 x CR2032 Li
III. SAFETY MEASURES
1. The glass platform will be slippery when it is wet. Keep it dry!
2. Keep standing still during the course of weighing.
3. Do not strike, shock or drop the scale.
4. Treat the scale with care as it is a precise instrument.
5. Clean the scale with a damp cloth and avoid water getting inside the scale. DO NOT
use chemical/abrasive cleaning agents.
6. Keep the scale in cool place with dry air.
7. Always keep your scale in horizontal position.
8. If failed to turn on the scale, check whether battery is installed, or battery power is
low. Insert or replace new battery.
9. If there is error on display or cannot turn off the scale for a long time, please take off
the battery for about 3 seconds, then install it again to remove soft-fault. If you cannot
resolve the problem, please contact your dealer for consultation.
10. Do not use it for commercial purpose.

OVERLOAD INDICATION

Scale overload (max. weight capacity is indicated on the scale). Please step off to avoid
damage.

LOW BATTERY INDICATION

Battery power is low. Please install new battery.
RE-TEST
Display "C" when you step off the scale, means this weight reading with error. Please
re-test.