Using Your E-Bike; Control Panel - IKEA FOLKVÄNLIG Bedienungsanleitung

5. USING YOUR E-BIKE

• Start pedalling; the electric motor will only assist you while
you are pedalling.
• If you wish to change the assist level, press the plus or minus
buttons.
• The power assists stops when you use the brakes.
• The power assists stops when you reach 25km/h.
• If you leave the e-bike unattended, lock the battery with the
key, or take the battery with you.
To start the battery, use the ON button.

Control panel:

The engine is controlled by the control panel on the handle bar.
There are six different speed levels. To reach optimal function
you should chose a low speed on the control panel and set the
gear switch in level 1 when you start pedalling.
ON/OFF:
Push and keep the ON/OFF button pressed for about 2 seconds.
The LCD display lights up. To shut the display down manually,
press the ON/OFF button for 2 seconds.
1. To start the display, use the ON/OFF button.
2. Keep the plus button down for a couple of second to turn on
the display light. Do the same thing to turn OFF the display
light.
3. The assistance levels are changed with the plus and minus
buttons. There are 6 levels available.
4. If you need support with leading your e-bike, keep the
minus button pressed down and your e-bike will reach 6
km/h.
9