Symbols Used In The Manual - Crown CT17013 Originalbetriebsanleitung

• The power tool may project small solid objects with
the air stream at great speed, which may injure the op-
erator or other persons� It is necessary to use personal
protective equipment (protective eyewear, protective
mask) and to equip the workplace appropriately�
• Do not aim the power tool at people or animals�
• Dust, appearing in the process of work, may be in-
jurious to health, highly inflammable or explosible. It
is necessary to use personal protective equipment�
• Do not use the power tool near objects emitting heat
or open fire. The use of power tool near such objects
may result in a fire hazard.
• Do not work materials containing asbestos�

Symbols used in the manual

Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol Meaning
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�
Read all safety regulations
and instructions�
Wear safety goggles�
Wear ear protectors�
Wear a dust mask�
Disconnect the power tool
from the mains before instal-
lation or adjustment�
Movement direction�
Rotation direction�
Locked�
Unlocked�
Symbol
Power tool designation
The air blower is designed for various works on clean-
ing by means of air blasting� In addition, the power tool
may serve as a vacuum cleaner�
Power tool components
1 Ventilation slots
2 Nozzle
3 Outlet sleeve
4 Inlet sleeve
5 On / off switch
6 Lock-on button
7 Dust bag *
* Optional extra
Not all of the accessories illustrated or described
are included as standard delivery.
Installation and regulation of power tool
elements
Before carrying out any works on the power tool it
must be disconnected from the mains.
Nozzle, dust bag / dismantling (see fig. 1-2)
• To mount the nozzle 2 connect it to the outlet
sleeve 3 or inlet sleeve 4 as shown in fig. 1.1 or 2.1.
• To mount the dust bag 7 connect it to the outlet
sleeve 3 as shown in fig. 2.1.
• Disassembly operations do in reverse sequence�
Initial operating of the power tool
Always use the correct supply voltage: the power sup-
ply voltage must match the information quoted on the
power tool identification plate.
English
12
Meaning
Double insulation / protec-
tion class�
Attention� Important�
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards�
Do not dispose of the power
tool in a domestic waste
container�