Setting The Volume - AUDIOropa pro:ton SP-100S Bedienungsanleitung

Transmitters and the receivers intended for their
reception must be set to the same channel group.

2.5 Setting the volume

The volume can be adjusted between »VOL 00«

to »VOL 09« by simply pressing the » « and
»  « buttons at any time.
2.6 MIC and AUX inputs
The MIC input serves to connect a microphone
with a 3-pole 3.5 mm jack plug. Input AUX is in-
tended as line-in for analogue audio signals (ste-
reo or mono).
Both inputs may be used at the same time. This
makes it, for example, possible to underline spo-
ken commentary with music.
Through this feature, the speaker can be used as
a voice amplifier, even without the microphone
transmitter SP-100M.
The level of the audio signal at the AUX input
must be adjusted via the audio source. An indi-
vidual adjustment of both inputs is not possible
via the SP-100S.
2.7 Power supply / recharge
The device is equipped with a rechargeable lithium-
ion battery of 7,4 V / 1700 mAh.
To charge the battery, plug the USB charging
cable into the USB socket of the SP-100S and
connect it to a regular USB port (computer, lap-
top, USB power supply).
The red charging status LED is lit during recharge.
16 English