Specifications - Connect IT CI-785 Benutzerhandbuch

WALL MOUNT ARM FOR FLAT SCREEN
Before putting this product into operation, please read carefully all the instructions, even
if you are already familiar with using similar products. Use the product only as described
in this manual. Keep this manual in case you need it for future reference.
EN
The electronic version of this user manual can be downloaded on the website
www.connectit-europe.com.
We recommend keeping the original packaging of the product, invoice and warranty
certificate at least for the time the warranty is valid. When shipping the product, we rec-
ommend using the original packacking that the product was delivered in that will provide
the best protection for it from being damaged during transport.
1
Warning
„ The wall or the surface used for securing the arm must have sufficient strength and
maximum load to secure the weight of the arm, the screen and other accessories.
„ When installing the screen, use an assistance of another person.
„ During the installation, tighten the screws properly, but make sure not to strip the
threads. That could damage the installed screen or significantly decrease the maximum
load of the arm.
„ This wall mount arm is designed for indoor use only. Outdoor use may cause harm,
damage to the arm or the installed screen.
„ Check the stability and safety of the mount at least every three months.
2

Specifications

„ Quick and easy assembly
„ Screws and concrete anchors included
„ With cable management
„ Full-motion wall mount
„ Fits most 13"-42" flat panels
„ VESA 75×75, 100×100, 200×100, 200×200 mm compliant
„ +15°/-15° continuous adjustable tilt
„ Swivel 360°
„ Extend from 9.2-25.7 cm
„ Max. load capacity: 20 kg
„ Color: black
CI-785
USER MANUAL