Overload Protection - Saga the 3X Bluicer Pro BJB815 Kurzanleitung

(approximately 6 pounds)
of carrot at a time.
• Avoid putting the blender
jug on the motor base while
the motor is still spinning.
• Do not operate without any
ingredients in the jug.
• Never attempt to operate
with damaged blades, or
with utensils, or any foreign
objects inside the jug.
• Do not put the jug in extremes
of heat or cold, for example
placing a cold jug into hot
water, or vice versa.
• Lid must be firmly secured
to the jug before operation to
ensure internal contents do not
escape, spray or overflow.
• Do not remove the jug
from the motor base while
blender is in use.
• Do not use blender while

OVERLOAD PROTECTION

is flashing on the LCD. If this
occurs, unplug the blender
and wait for 30 minutes until
the motor has cooled. Once
cooled, you will be able to use
the blender as usual again.
• Do not process hot or boiling
liquids. Allow to cool before
placing into the blender jug.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
• To protect against electric
shock, do not immerse the
power plug, cord or appliance
in water or any liquid.
• Do not use the appliance if the
power cord, power plug, or
appliance becomes damaged
in any way. If damaged and
maintenance other than
cleaning is required please
contact Sage Customer Service
or go to sageappliances.com
The symbol shown
indicates that this appliance
should not be disposed of
in normal household waste.
It should be taken to a local
authority waste collection centre
designated for this purpose or to
a dealer providing this service.
For more information, please
contact your local council office.
To protect against electric
shock, do not immerse the,
power base, power cord or power
plug in water or allow moisture to
come in contact with these parts.
Avoid spilling water onto the
power base's connector. Do not
immerse the power base
for cleaning.
EN
5