MaxPro PROFESSIONAL MPCD18HLi/2E Bedienungsanleitung Seite 9

charger
• In case of electrical or mechanical malfunction, immediately switch off the tool or unplug charger from
power source
• Maxpro can assure flawless functioning of the tool only when the correct accessories are used which can
be obtained from your Maxpro dealer
• Use only accessories with an allowable speed matching at least the highest no-load speed of the tool
• The tool/charger is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the tool/charger by a person responsible for their safety
• Ensure that children do not play with the tool/charger
• Secure the work piece (a work piece clamped with clamping devices or in a vice is held more securely
than by hand)
• Hold the power tool only by the insulated gripping surfaces when performing an operation where the
accessory may contact hidden wiring or its own power cord (contact with a "live" wire will also make
exposed metal parts of the power tool "live" and shock the operator)
• Use suitable detectors to find hidden utility lines or call the local utility company for assistance (contact
with electric lines can lead to fire or electrical shock; damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or an electrical shock)
• Do not work materials containing asbestos (asbestos is considered carcinogenic)
• Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful (contact with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to
the operator or bystanders); wear a dust mask and work with a dust extraction device when connectable
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust) especially in conjunction
with additives for wood conditioning; wear a dust mask and work with a dust extraction device when
connectable
• Follow the dust-related national requirements for the materials you want to work with
• Ensure that switch is in the middle (locking) position before making any adjustments or changing
accessories as well as when carrying or storing the tool
CHARGING/BATTERIES
• Charge battery only with the charger that is supplied with the tool
• Do not touch the contacts in the charger
• Do not expose tool/charger/battery to rain
• Do not charge battery in damp or wet environments
• Store tool/charger/battery in locations where temperature will not exceed 50°C or drop below 0°C
• Do not use charger when damaged; take it to one of the officially registered Maxpro Service Stations for
a safety check
• Do not use charger when cord or plug is damaged; cord or plug should be replaced immediately at one of
the officially registered Maxpro Service Stations
• Do not use battery when damaged; it should be replaced immediately
• Do not disassemble charger or battery
• Do not attempt to recharge non-rechargeable batteries with the charger
• If you anticipate long periods of non-use for the tool, it is best to unplug the charger from its power
source
WHEN CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
• Do not connect the blue (= neutral) or brown (= live) wire in the cord of the charger to the earth terminal
of the plug
• If for any reason the old plug is cut off the cord of the charger, it must be disposed of safely and not left
unattended
4 GB