Programming Mode; Specifications - vogel's PPA-350 Bedienungsanleitung

Programming Mode

The following functions will work only after entering Manual Mode.
Function
Set Show position (all the way up)
Set Maintenance position
Exit Manual Mode
Error Correction
Stop
Override

Specifications

CE tested according compliance test
EN 61000-6-1:2001& EN 61000-6-3: 2007
Operation:
Power:
Battery :
IR:
Button
Press HIDDEN for 1 second, release,
then press UP button
Press HIDDEN second, release,
then press DOWN button
Press HIDDEN for 1 second, release,
then press STOP Button (Red)
Error blinks Press & hold STOP button for 10 seconds
7 Blinks Press & hold STOP button for 10 seconds,
Release, then press & hold HIDDEN for 5 seconds, release,
press UP button.
5-10 meter
5 Volts DC, 100mA
2 x type AA Alkaline
38Khz
3