Heinner HPS-180WH Bedienungsanleitung Seite 20

www.heinner.com
V. INSTALLING OR REPLACING THE BATTERY
The battery type of scale depends on the product structure. Find the battery type of
your scale according to the following pictures, then install and replace battery as
described.
1. 1x3V or 2x3V CR2032 lithium batteries (included). Remove isolation sheet before
use;
2. 2x1.5V (AA/AAA) batteries (excluded). Remove package foil before use.
Battery baffle
Open the battery case cover at the bottom of scale:
a. Take out the used battery with the aid of an object with pointed end, as shown in
picture 1
b. Install new battery by putting one side of the battery beneath the battery baffle and
then pressing down the other side.
Positive plate
Open the battery case cover at the bottom of scale:
a. Press battery gently, the battery will pop up automatically;
b. Install new battery by connecting one side of battery to the positive plate first, and
then pressing down the other side. Please observe the polarity.
Picture 3
Open the battery case cover at the bottom of scale:
a. Take out used batteries, with the aid of an object with pointed end if needed
b. Install new batteries by putting one side of the battery down first and pressing down
the other side (please observe the polarity).
Picture 1
Picture 2
180 кг, 2x1.5V AAA