Gateway Mode; Webserver - BeeWi BLR07 Benutzerleitfaden

7
confirm action and wait for about 3 minutes for the firmware update to be confirmed.

4. GATEWAY MODE

4.1. Introduction
The Smart Color bulb can be also controlled distantly via the internet using a specific
internet gateway. In that case, it is necessary to use a different web application as des-
cribed in the BeeWi Gateway manual.
4.2. Pairing
In order to register the Smart Color Bulb as part of the Beewi-home network, it is neces-
sary to pair it securely with the Master Gateway. To do this, follow these steps:
1) Fit the Smart Color Bulb into a lamp/bulb socket. For safety, turn off the power before
fitting the bulb in the socket.
2) Turn on the power. The bulb will be visible for pairing during one minute after it has
been powered on.
3) Press the Gateway button until the LED flashes twice per second to initiate pairing.
4) Once Smart Color Bulb has been successfully paired with the Gateway, the new peri-
pheral will show in the web app home screen.
4.3. Web server
Go to the Beewi-home portal using a web browser or the web app to access your periphe-
ral.
Using the portal under your own account, it will be possible to access some of the func-
tions supported by the SmartPad app:
- Smart Color Bulb status: On/Off, White or RGB status
- Action settings: switch Smart Color Bulb On and Off manually or depending on time.
5. CAUTION & WARRANTY EXCEPTIONS
5.1. Taking care of your Bulb
• Use the product indoor only.
• Avoid storage at extreme temperatures, above 45°C (including direct sunlight) or
below -10°C.
• Do not expose the product to rain or moisture.
• When not in use, always store the product in a safe place.
5.2. Damages not covered by standard Warranty
• Damages caused by an improper use of the product such as shocks, drops, exposition
to extreme temperatures, dust, or humidity, or any other cause.
• Damages resulting from any non-respect of manufacturer instructions.
• Cosmetic damages such as scratches, paint, glue or any other alteration made to the product.
• Damages to the product after an repair or disassembly from non authorized personal.
ENGLISH