Using The App; Home Screen; Control Screen - BeeWi BLR07 Benutzerleitfaden

6
the bulb.
1) Download and install the BeeWi SmartPad app.
2) Fit the Smart Color Bulb into a lamp/bulb socket. For safety, turn off the power before
fitting the bulb in the socket.
3) Turn on the power. The bulb will be visible for pairing during one minute after it has
been powered on.
4) Open the app and press "Add Peripheral" to look for your peripheral and initiate
pairing.
5) Once "BeeWi Smart Color Bulb" is listed, select it to pair it. After successful pairing, a
new box is showing in the app home screen.

3. USING THE APP

Warning: some operations may differ in function of the OS used.

3.1. Home Screen

The home screen is listing all the peripherals paired and connected to the device.
By selecting the peripheral box, it is possible to:
- Reconnect the peripheral in case the connection has been lost
- Access the control screen when the peripheral is connected
- Drag and move the box when holding the finger on the box
In the box, you will find the following information and function:
- Smart Color Bulb picture (user defined)
- Smart Color Bulb name (user defined, "BeeWi Smart Color Bulb" by default)
- Connection status and signal strength bar
- On/Off status symbol
- Manual On/Off switch button
- Current mode (White or RGB)
It is possible to control the On/Off switch directly from the Smart Color Bulb box without
opening the control screen.

3.2. Control Screen

The control screen is made of 2 different selectable screens for White and Color controls.
The default screen is the current state (white or RGB). In the control screen, it is possible
to program specific behaviors such as:
- Manual switch
- White (from cold to warm) or RGB colors
- Brightness
- Specific color sequence
Note the settings will automatically be stored in memory
3.3. Edition Screen
The edition screen allows for editing Smart Color Bulb details such as name and picture.
It also includes other settings such as wake up and sleep times, On and Off timers and
group edition to group multiple bulbs within a single control.
The edition screen also includes a button to update Smart Color Bulb to latest firmware.
To update the firmware, just press the "Update peripheral" button in Edition screen, then
ENGLISH