Range Of Use; Technical Data - TIP COMPAC 7500 Gebrauchsanweisung

2. Range of use

Submersible dirty water pumps from T.I.P. are highly efficient electrical pumps for discharging clear or dirty water
containing solids up to the maximum size specified in the technical details. These high-quality products with their
convincing performance data were developed for the multiple purposes involved with draining and pumping
liquids from one place to another.
The typical ranges of application of submersible clean water pumps include: draining of ponds, basins and
storage containers as well as discharging of rain water or seepage.
Submersible clean water pumps from T.I.P. are suitable for stationary or temporary installations.
The pump is not suitable for use in table-top fountains, aquariums or similar ranges of use.
This product was developed for private use, i.e. not for industrial applications or for continuous operation. When
using the unit in a pond, please take the required action to ensure that no inhabitants of the pond will be sucked
in.
The device is not suitable for use in swimming pools or for the supply of drinking water.
The pump is not suited to discharge saltwater, faeces, inflammable, etching, explosive or
other hazardous liquids. Please observe the max. temperature of the liquids to be discharged
stated in the technical data.
Inside the pump, lubricants are used which may contaminate the liquids being discharged in
case of any improper operation or damage of the device. The lubricants used are biologically
degradable and non-hazardous to health.

3. Technical Data

Model
Mains voltage / frequency
Nominal performance
Protection type
Pressure port
1)
Max. flow rate
(Qmax )
Max. pressure
1)
Max. delivery height
(Hmax)
Max. submersion depth 
Max. size of the solids being pumped
Max. fluid temperature (Tmax)
Max. cut-in frequency in one hour
Length of connection cable
Cable type
Weight (net)
Min. self-priming level in manual operation (A)
Min. evacualtion level in manual operation (B)
Starting level in automatic operation (C)
Cut-out level in automatic operation (D)
Dimensions (L x D x H)
Item no.
1)
The values were determined with free, unreduced outlet.
2)
The values between brackets refer to the illustrations given at the end of these operating instructions.
10
I-Compac 7500
230 - 240 V~ / 50 Hz
400 Watt
IPX8
47.80 mm (1 ½ "), male
7,500 l/h
0.5 bar
5 m
5 m
16 mm
35 °C
30, evenly distributed
10 m
05RN8-F
4.2 kg
2)
75 mm
2)
25 mm
2)
170 mm
2)
70 mm
22 x 19 x 29.5 cm
30190
2
I-Compac 13000
230 - 240 V~ / 50 Hz
750 Watt
IPX8
47.80 mm (1 ½ "), male
13,000 l/h
0.9 bar
9 m
7 m
16 mm
35 °C
30, evenly distributed
10 m
H07RN8-F
ca. 5.2 kg
75 mm
25 mm
170 mm
70 mm
22 x 19 x 29.5 cm
30191