Ayce HD 220 Gebrauchsanweisung Seite 56

Appliance does not generate sufficient pressure
Fault
Running speed of the engine too low.
Low-pressure nozzle (4) is fitted.
Nozzle(4) blocked/eroded.
Intake filter(31) contaminated
Air in the system.
Water supply quantity too low.
Supply lines to high-pressure pump(39)
leaking or blocked.
Appliance is leaking, water dripping from under appliance
The high-pressure pump(39) is leaking.
NOTE
Max. permissible is 3 drops per minute.For more serious leaks, have the appliance
checked by customer.
Cleaning agent is not drawn in
Fault
High-pressure nozzle (4) is fitted.
Cleaning agent hose(11) leaking or
blocked.
NOTE
the fault cannot be remedied, the appliance must be checked by customer service.
Remedy
Check running speed of the engine
(see technical specifications).
Fit high-pressure nozzle (4).
Clean/replace nozzle(4).
Clean intake filter(31)
Bleed the appliance (see "Use").
Check water supply (see technical
specifications).
Check all supply lines to high-pressure
Pump(39).
Remedy
Fit low-pressure nozzle (4).
Inspect/clean cleaning agent hose(11).
109 | 110
GB DE GB GB IT