How To Operate The Appliance; Thermostat Setting - Proline PLI135-F-1-LED Bedienungsanleitung

PART 2.

HOW TO OPERATE THE APPLIANCE

Thermostat Setting

• Note that; the ambient temperature, temperature of the freshly stored food and
how often the door is opened, affects the temperature in the refrigerator. If
required, change the temperature setting.
• When you first switch on the appliance, you should ideally try to run it without any food
in for 24 hours and not open the door. If you need to use it straight away, try not to put
much food inside.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting in order not to damage the compressor.
• LARDERS (without star rating): Larders (coolers) have not any freezer compartment
but can cool down to 4 - 6°C.
• Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. We do not
recommend operating your fridge out of stated temperatures value limits in terms of
cooling effectiveness.
• Thermostat automatically regulates the inside
temperature of the refrigerator. By rotating the
knob from position 1 to 5, colder temperatures
can be obtained.
• The " • " position shows thermostat is closed
and no cooling is available.
• For short-term storage of food in the refrigerator,
you can set the knob between minimum and
medium position (1-3).
• For long-term storage of food in the refrigerator,
you can set knob medium position.(3-4)
Climate Class
T
ST
N
SN
EN - 26 -
Ambient Temperature (°C)
Between 16 and 43 (°C)
Between 16 and 38 (°C)
Between 16 and 32 (°C)
Between 10 and 32 (°C)