Factory Reset; Software-Updates - Revo PiXiS RX Handbuch

SYSTEM SETTINGS

FACTORY RESET

By selecting FACTORY RESET from the SYSTEM SETTINGS menu, you
can reset PiXiS RX to its default factory values, erasing any personal
settings that may have been confi gured (time/date, network
confi guration and presets will be erased). However, your radio's
current software version is maintained, as is its registration with the
internet radio portal. Internet radio favourites are therefore retained,
unless you re-register your radio with another account on the portal.
To perform a factory reset, press
followed by SYSTEM SETTINGS, then FACTORY RESET. Now answer YES.
SOFTWARE UPDATES
From time to time we will make software updates available for your
radio. These are necessary for general maintenance reasons, as well
as for adding additional functionality to your radio. Software updates
are carried out 'over-the-air', via your broadband connection.
PIXIS RX will check for software updates each time it is switched on,
and if an update is available, will ask you to confi rm that you'd like to
go ahead and commence the download.
Please note that after a software upgrade, all user settings are
maintained.
If you'd prefer to manually check for software updates, press
then select MAIN MENU. Now choose SYSTEM SETTINGS, then
SOFTWARE UPDATES. Select AUTO-CHECK SETTING then choose NO
when prompted.
To manually check for updates, select CHECK NOW from the
SOFTWARE UPDATES menu.
CAUTION: Before commencing a software upgrade, ensure that
PiXiS RX is plugged into a stable mains power connection.
Disconnecting power during a software update may permanently
damage your device.
36
then select MAIN MENU,
Factory Reset
Proceed?
YES NO
Software update
Auto-Check setting
Check now