Multiroom - Revo PiXiS RX Handbuch

MULTIROOM

UNDOK MULTIROOM SETUP
If you are running more than one PiXiS RX (or other UNDOK-
enabled device) on the same network you can create a
multiroom system without using the UNDOK app.
To begin, press the button then select SYSTEM SETTINGS,
followed by MULTIROOM to enter the multroom setup menu.
Select 'Create New Group' to create and name a new
multiroom group (e.g. Ground Floor). PiXiS RX will then promt
you to add other devices to this group.
MULTIROOM MENU OPTIONS:
View the details of your multiroom group - i.e if the device is a
server (master) or client (slave) and the group's name.
As the server you can add more devices to your multiroom
group.
NB This function can only be performed by the server.
List current clients in the group, and remove them if required.
If the device you're using is a client, you can opt to leave the
mulitroom group.
If the device you're using is the server, you can dissolve the
multrioom group entirely.
As with the UNDOK app, the UNDOK multiroom software on your
PiXiS RX is constantly being updated and improved.
For the latest information, please visit www.revo.co.uk
Multi-room
View details
>
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details
>
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details
>
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details
>
Create new group
Add to group >
List current clients >
Leave group
Multi-room
View details
>
Create new group
Add to group >
List current clients >
Leave group
Multi-room
Create new group >
Add to group >
List current clients
>
Leave group
Dissolve group
29