Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety advices:
Switch off all devices befor the Installation
Installation and repairs to the equipment may only be carried out by
technicians observing the current guidelines. No liability will be assumed
in the case of faulty installation and commissioning.
Before opening the equipment remove the power supply, otherwise there
is danger of of short-circuit. This is also valid for cleaning the equipment
or working on the connections.
The equipment may only be operated in dry rooms. In humid rooms or
outdoors there is danger of short-circuit (caution: risk of fire).
Choose the location of installation or mounting such that children may
not play unsupervised near the equipment and its connections. The
location of installation or mounting must allow a safe installation of all
cables connected. Power feeding cables as well as feeder lines may not
be damaged or clamped by objects of any kind. To prevent damage to
your equipment and to avoid possible peripheral damages, the devices
foreseen for wall mounting may only be installed on a flat surface.
Choose the location of installation or mounting so that under no
circumstances liquids or objects can get into the equipment (e.g.
condensation, water coming from leaking roofs or flowing water, etc.).
Avoid exposure of the equipment to direct sunlight and to other heat
sources (e. g. radiators. other electrical devices, chimneys, etc.). Devices
that are equipped with heat sinks or ventilation slots must under no
circum-stances be covered or blocked. Also ensure for a generous
air circulation around the equipment. In this way you avoid possible
damage to the equipment as well as a risk of fire caused by overheating.
Absolutely avoid that cables come near any source of heat (e.g.
radioators, other electrical devices, chimneys, etc.).
State of the art 2019-11-26
Technical improvements, changes in design, printing- and other errors expected.
Technical data:
Typ
Frequency range
Input level adjustment range
Connectors
Connector DC
RF connectors
Type
General
Operation voltage
Remote voltage
Current consumption
Herewith AXING AG declares that the marked products comply with the valid
guidelines.
WEEE Nr. DE26869279 | Electrical and electronic components must not be
disposed of as residual waste, it must be disposed of separately.
Manufacturer
EEA contact address
AXING AG
Bechler GmbH
Gewerbehaus Moskau
Am Rebberg 44
8262 Ramsen
78239 Rielasingen
TZU02201
47...862 MHz
20 dB
TZU 22-01
3.5 mm jack plug
F-female
basic-line
5...12 VDC
5 VDC
Signal tester DVB-T/T2
25 mA
analogue | digital
Operation instructions
Werbung
