Technical Data; Safety Advice - LIVARNO Z30846 Montageanleitung

Introduction / Safety advice / Assembly
6 Caps
1 Assembly instructions

Technical data

Dimensions: approx. 42 x 60 x 34 cm (W x H x D)
Material: MDF, chipboard
Max. load: 20 kg for top panel
10 kg per drawer

Safety advice

KEEP ALL THE SAFETY ADVICE AND INSTRUC-
TIONS IN A SAFE PLACE FOR FUTURE
REFERENCE!
OF LIFE OR ACCIDENT TO IN-
FANTS AND CHILDREN! Never
leave children unsupervised with the packaging
materials. Danger of suffocation. This product is
not a toy!
CAUTION! RISK OF INJURY! Make sure
that all parts are undamaged and assembled
correctly. Improper assembly carries a risk of
injury. Damaged parts may affect the safety
and function of the product.
CAUTION! Do not leave children unsupervised!
The product is not a climbing frame or a toy!
Make sure that nobody, especially a child, climbs
on or leans against the product. The wall fasten-
ings could be torn out of the wall and the prod-
uct could tip over, resulting in injury or damage.
DANGER OF ELECTRIC SHOCK!
DANGER OF DAMAGE TO
PROPERTY! DANGER OF IN-
JURY! Ensure that you do not strike electrical
cables, gas or water pipes when you are drilling
into the wall. If necessary, check the wall using
a suitable detector before you drill.
Examine the wall before installation and choose
suitable installation fixings. We have supplied
fixings suitable for an ordinary solid masonry wall.
4 GB/IE
64100_liv_Beistellkommode_Content_LB3.indd 4
Make sure that this product is standing on a
solid, level surface.
Distribute weight upon this products' surface
evenly so that it cannot overturn.
Regularly check the stability of all connections
and retighten the screws.
Keep the product away from water and mois-
ture. Otherwise the product may be damaged.
The safety of the product can only be ensured
if it is properly assembled and all connections
are made securely.
Check the stability of the product before you
use it.
CAUTION! Do not lift or move the product if
it is supporting any object.
RISK OF LOSS
not get themselves between the drawers and
the carcass when you are opening or closing
the drawers.
kg
to observe this advice may lead to injury and/
or damage to the product.
Assembly
Note: Assemble the product on a scratch-resistant
floor that is sufficiently large. You may have to put
a blanket or the like down in order to avoid
damaging the product.
Note: This product requires wall mounting. Make
sure that you position the mounting material at the
right height. Otherwise you will not be able to
mount the product correctly.
Note: Assembly requires an electric drill with a
6 mm diameter drill bit and a screwdriver. Refer to
the operating instructions for your electric drill be-
fore assembly.
CAUTION! FIRE HAZARD! Do
not position the product near an
open fire and / or radiant heaters.
CAUTION! RISK OF SHEAR-
ING OR CRUSHING INJURY!
Please ensure that your fingers do
Do not exceed the allowable maxi-
mum loads on the top panel (20 kg)
or the drawers (10 kg each). Failure
06.05.11 16:44