LevelOne NVR-0204 Schnellinstallationsanleitung Seite 5

LevelOne NVR Series
Network Video Recorder
Connect to the NVR
There are various ways you can connect to the NVR and below are the
suggested methods for different network setup:
Use LevelOne Device Search Utility
If the NVR is placed in a corporate network or a local area network where
a DHCP server is already presented, run the "LevelOne Device Search"
utility from a computer that is on the same network and locate the NVR
with its IP address that is assigned by the top-level DHCP server.
To begin, launch the "LevelOne Device Search" utility from the CD and
proceed with the installation:
Once the installation is complete, check the "Launch the Search AP" option
and click "Finish":
The search should start automatically and its status should be displayed:
The NVR should be located and its IP address should be displayed:
5