LevelOne NVR-0204 Schnellinstallationsanleitung Seite 3

LevelOne NVR Series
Network Video Recorder
Install Hard Disk
Start by removing the screws on the side, Push the top housing forward, then lift it up
. The NVR supports SATA I or SATA II hard disks
. The NVR supports max. 1TB per hard disk and it supports total of 2 hard disks
(2TB)
Remove the hard drive cover plate, Pull out the hard drive tray holder
Place the hard drive on the tray and push it inward to secure the hard drive
Connect the SATA cable to the hard drive; Put the hard drive tray cover plate back
Place the top housing back and secure it with the bottom housing
3