Hisense RB390N4BC2 Benutzerhandbuch Seite 42

11
4. Remove the upper door from the
middle hinge by carefully lifting the
door straight up. Then place the
upper door on a smooth surface with
its upper cover upwards.
5. When the refrigerator with a
display on door, take screw hole
cover(right) from plastic bag and
install it onto the top right side of
refrigerator body.Then remove
screw hole cover(left) from the top
left side of appliance and put it into
plastic bag.
When the refrigerator without a
display on door, pull out screw hole
cover from the left side up rightly,
and fix it on the right side.
MODEL WITH DISPLAY
Screw hole cover
MODEL WITHOUT DISPLAY
Screw hole cover
6.When the refrigerator with a
display on door, remove part
the top left side of upper cover and
take out part ② . Then remove part
③ and put part ④
side of upper cover. Refer to above
operation, install part
on to the top left side of upper
cover.Install part
side of upper cover. When the
refrigerator without a display on
door, skip this step.
① orner cover left C
② Electrical connector left
③ Corner cover right
④ Electrical connector right
MODEL WITH DISPLAY
7. Loose screw ③
part ② and part ①
replacement door stopper-left
provided (in the plastic bag) and part
② (stop block) to the left side with
screw ③ . Keep part
appliance for future reference.
8. Loose screws used to fix the
middle hinge and remove middle
hinge. Then remove the lower door.
from
①
into the top right
③ and part ④
① of the top right
( )
( )
( )
( )
and take down
, Install
④
① with the