Frequently Asked Questions - Asus RP-AC55 Schnellstartanleitung

Frequently Asked Questions

Q1: What should I do if my router does not support WPS?
• You can use Method Two to set up RP-AC55.
Q2: Why is it that the LED indicator for the current network does not light up after the Wi-Fi setup is
complete?
• Y ou may have entered the wrong password for the router/AP. Please restart your RP-AC55, enter the correct password, and try to
set up your RP-AC55 again.
Q3: Why is it that I cannot see the login page after entering http://repeater.asus.com in the browser?
• E nsure that your computer is connected to your RP-AC55 network only, and set your computer to Obtain an IP address au-
tomatically. If you still cannot find the login page, please download the ASUS Device Discovery utility. You can download the
utility for Windows and Mac from https://www.asus.com/Networking/RP-AC55/HelpDesk_Download/.
Q4: How do I reset RP-AC55?
• P ress the RESET button on the side of RP-AC55 for about two (2) seconds. Wait for about five (5) seconds until the existing net-
work LED blinks slowly.
Q5: I cannot access the web GUI to configure the RP-AC55 settings.
• Close all running web browsers and launch again.
• Follow the steps below to configure your computer settings based on its
operating system.
Windows 7
A. Disable the proxy server, if enabled.
1. Click Start > Internet Explorer to launch the web browser.
2. Click Tools > Internet options > Connections tab > LAN settings.
3. From the Local Area Network (LAN) Settings screen, untick Use a proxy server for your LAN.
4. Click OK when done.
6
U14322_RP-AC55_QSG_V3.indb 6 2018/5/22 18:10:00