Setting The Time; Setting The Date - Bison BI 0007 Bedienungsanleitung

QUARTZ MOVEMENT OPERATION MANUAL

Setting the time:

1. Pull out the crown to the second click position.
2. Turn the crown to set Hour and Minute hands. (Check that AM/PM is set correctly).
3. Push the crown back into the normal position.
* If the crown is pulled to the second position while the chronograph is started. The chronograph hands will continue
to move. This is not a malfunction.

Setting the date:

1. Pull out the crown to the first click position.
2. Turn the crown clockwise for date setting.
* Do not set the date between 9:00PM and 3:00AM, otherwise the day may not change properly. If it is necessary
to set the date during that time period, first change to any time outside it, set the date and then reset the correct
time.
3. Pull the crown back into the normal position.
Use precaution:
1. On case back marked 5 ATM water resistant that means only for normal daily water contact, such as lightly
raining, washing hand etc, and it is not allowed to swim.