Installing The Product; Using The Product - nedis MEPH2020WT Kurzanleitung

•
Seek medical advice immediately if a cell or a battery has been swallowed.
•
Use only the cell or battery in the application for which it was intended.
•
Remove the batteries during long periods of disuse to avoid possible leakage.
•
Do not drop the product and avoid bumping.
• Keep the product away from heat sources. Do not place the product on hot
surfaces or near open flames.
•
Do not expose the product to water or moisture.
•
Do not immerse the product in water.

Installing the product

4
Use only size AA batteries for this product.
1. Press the release button A
2. Place 4 batteries into the battery compartment A
Make sure to match the (+) and (-) polarity markings.
-
3. Close A

Using the product

4
The power indicator LED indicator indicates if the product is switched on.
1. Press the power button A
2. Press the music/speak button A
mode.
3. In music mode the speaker A
4. In speak mode you can speak into to the microphone A
voice.
5. Rotate the volume wheel A
level.
6. Press A
Specifications
Product
Article number
Dimensions (l x w x h)
Output power
Volume control
EPH2020WT_MEPH100WT_MAN_COMP_1119_print_(19757 1422)_v01.indd 5
5
7
.
3
4
3
again to switch off the product.
to open the battery cover A
8
to switch on the product.
6
to switch between music and speak
9
emits music.
to adjust the volume to the desired sound
Megaphone
MEPH2020WT
155 x 97.5 x 150 mm
15 W
Up to 100 dB
5
7
.
.
1
to amplify your
MEPH100WT
20-11-2019 10:27:1