ASROCK 990FX Extreme9 Bedienungsanleitung Seite 25

Step 2. Use one CrossFire
and PCIE4 slots, and use the other CrossFire
graphics cards on PCIE4 and PCIE5 slots. (CrossFire
with the graphics card you purchase, not bundled with this motherboard.
Please refer to your graphics card vendor for details.)
Step 3. Connect the DVI monitor cable to the DVI connector on the Radeon graph-
ics card on PCIE1 slot. (You may use the DVI to D-Sub adapter to convert
the DVI connector to D-Sub interface, and then connect the D-Sub monitor
cable to the DVI to D-Sub adapter.)
Please refer to the "User Manual" in our support CD for drivers installation and
setup procedures.
TM
* CrossFireX appearing here is a registered trademark of AMD Technologies Inc., and is
used only for identification or explanation and to the owners' benefit, without intent to infringe.
* For further information of AMD CrossFireX
updates and details.
TM
Bridge to connect Radeon graphics cards on PCIE1
TM
CrossFire Bridge
TM
technology, please check AMD website for
ASRock 990FX Extreme9 Motherboard
TM
Bridge to connect Radeon
TM
Bridge is provided
25