ASROCK 990FX Extreme9 Bedienungsanleitung Seite 20

TM
2.5 SLI , 3-Way SLI
This motherboard supports NVIDIA
Link Interface) technology that allows you to install up to three identical PCI Express
x16 graphics cards. Currently, NVIDIA
/ XP 64-bit / Vista
TM
SLI and Quad SLI
64-bit / 8 / 8 64-bit OS only. Please follow the installation procedures in this section.
Requirements
1. For SLI
2. Make sure that your graphics card driver supports NVIDIA
3. Make sure that your power supply unit (PSU) can provide at least the
2.5.1 Graphics Card Setup
2.5.1.1 Installing Two SLI
Step 1. Install the identical SLI
because different types of graphics cards will not work together properly.
(Even the GPU chips version shall be the same.) Insert one graphics card
into PCIE1 slot and the other graphics card to PCIE4 slot. Make sure that
the cards are properly seated on the slots.
Step2. If required, connect the auxiliary power source to the PCI Express graph-
ics cards.
20
TM
and Quad SLI
®
SLI
TM TM
/ Vista 64-bit / 7 / 7 64-bit / 8 / 8 64-bit OS. NVIDIA
TM
technology support Windows
TM
technology, you should have two identical SLI
®
cards that are NVIDIA certified. For 3-Way SLI
have three identical 3-Way SLI
TM
certified. For Quad SLI
TM
SLI -ready graphics cards that are NVIDIA
Download the driver from NVIDIA website (www.nvidia.com).
minimum power required by your system. It is recommended to use
®
NVIDIA certified PSU. Please refer to NVIDIA
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
ASRock 990FX Extreme9 Motherboard
TM
Operation Guide
TM TM
, 3-Way SLI and Quad SLI
® TM
SLI technology supports Windows
® TM
Vista
TM
TM
-ready graphics cards that are NVIDIA
technology, you should have two identical Quad
®
certified.
®
website for details.
TM
(Scalable
®
XP
®
3-Way
TM
/ Vista 64-bit / 7 / 7
TM
-ready graphics
technology, you should
®
® TM
SLI technology.
®
certified