Makita 449 Bedienungsanleitung Seite 23

D - MAINTENANCE
VERY
IMPORTANT:
1
.... CHANGING THE OPTIONAL COLLECTION BAG
- Remove the plastic flange (x) from the air inlet connector
(y) fig. "D1".
- Take out the full PE bag fig. "D2".
- Close the flange (X) with the cap provided fig. "D3".
2
.... FOAM FILTER
Rinse the foam filter with water. DO NOT use detergent
-
fig. "D4".
- Replace if it is worn or damaged.
3
....
CARTRIDGE FILTER
- Clean the cartridge frequently with a soft-bristled brush
fig. "D5".
- For thorough cleaning, d
towards the outside
- Before replacing the cartridge filter make sure it is
completely dry.
- Replace if it is worn or damaged.
4
....
BASKET PRE-FILTER
- Clean the pre-filter (p) and the basket (g) by spraying water
from the inside out fig. "D8".
Make sure it is completely dry before using it again.
Replace if it is worn or damaged.
Always unplug the appliance from the
mains power supply.
irect the water from the inside
fig. "D6".
- 23 -
EN
Cod.
83 139H0B *
Cod .
83 035H0B
Cod.
83 140H0G *
Cod.
83 010H0I
*
Pack code