Makita 448 Bedienungsanleitung Seite 21

D - MAINTENANCE
VERY
IMPORTANT:
1
....
CHANGING THE PAPER FILTER BAG
(Pack code 83 140B0K)
- Remove the plastic fl ange (x) from the air inlet
connector (y) fi g. "D1".
- Take out the full paper fi lter bag fi g. "D2".
- Close the plastid fl ange with the cap provided
fi g. "D3".
2
....
3-STAGE CARTRIDGE FILTER
(Pack code 83 200BDG)
- Clean the cartridge frequently with a soft-bristled brush
fi g. "D4".
- For thorough clearing of the cartridge, fl ush with water from the
inside out fi g. "D5".
- Before replacing the cartridge fi lter make sure it is completely
dry.
- Replace if it is worn or damaged.
CAUTION: Handle the cartridge fi lter with care when it is wet fi g. "D6".
3
....
EXHAUST FILTERS
- Periodically replace the exhaust fi lters.
4
....
CLEANING THE DRUM
- Check the amount of vacuumed material.
- Empty the drum when it is half full.
- Dry the drum and accessories after vacuuming li-
quids.
Always unplug the appliance from the
power supply.
fi g. "D7"
- 21 -
EN