EUROM Force 1218 Ash Cleaner Metal Bedienungsanleitung Seite 29

Description
1. Hose connection for suction
2. On/off button (I/O)
3. Hood with motor
4. Hose connection for blowing
5. Boiler
6. Wheels (3x)
Assembly
Remove all packaging material and keep out of the reach of children. After

removing the packaging, check that the device does not show any damage or
signs that could indicate an error/defect /malfunction. If in doubt, do not use the
device, but contact your supplier for inspection/replacement.
Open both clamps (10) and remove the motor cover (3) from the boiler (5).

The boiler contains the accessories: 3 wheels (6), hose (7) and nozzle (8).

Remove these accessories from the boiler.
 Hold the boiler upside down and click the three wheels on the outer edge at the
bottom of the boiler. The positions where the three wheels must be mounted are
marked with labels on the bottom of the boiler.
 Check whether the HEPA filter (9) has been positioned correctly.
 Replace the motor cover (3) on the boiler (5) and close both clamps (10).
7. Hose
8. Nozzle
9. Fire prevention HEPA filter
10. Clamps (2x)
11. Electrical cable storage hooks
12. Handle
29