Menu Channel Settings; Menu Public Data - Team Electronic HAM MobileCom 1011 Bedienungsanleitung

HAM_MobileCom-1011_man2_newDim2:Layout 1 7/17/2014 10:24 AM Seite 25
1. To open the menu channel settings, first, press the key【MENU】(5) shortly (the symbol F
(1) will appear) and then, press the channel selector【PUSH】(14).
2. Make your selection by turning the rotary channel selector (14).
3. Press the channel selector【PUSH】(14) to access the available settings.
4. Now, make your selection by turning the rotary channel selector (14) and confirm your
selection by pressing the channel selector【PUSH】(14).
5. To exit the menu, press the key【MENU】(5) or any other key.
No. Function
1 BUSY
2 REP
8 SCAN
4 Public Data
5 HI-CUT
6 NB
7 ECHO
8 10KHz
9 ROGER
1. Press and hold the key【PUSH】(14) for appr. 2 seconds to open the menu.
2. Turn the rotary channel selector (14) to make your selection.
3. Push the key【PUSH】(14) to access the available settings for the function.
4. Turn the rotary channel selector (14) to make your selection.
5. Confirm the selection by pressing the key【PUSH】(14).
6. Press any key to exit the menu.
No. Function
1 Hi-cut
2 NB
3 Echo
4 10kHz
5 Roger

MENU CHANNEL SETTINGS

LCD Symbol settings and description
transmission blockage on occupied channels; ON/OFF
direction of TX REP frequency shift
OFF
REP+ : shift to top
REP-
SC edit scan list; symbol SC (14)
ADD / DEL
PD general settings; ON / OFF; activates / deactivates
Menu Channel settings in active state, these functions
are not available: HICUT, NB, ECHO, 10KHZ and
ROGER
HIC receiving tone type; ON / OFF
NB Noise Blanker; ON / OFF
ECHO Echo; ON / OFF
10k frequency shift +10 kHz; ON / OFF
RB Roger Beep; 1-8, OFF

MENU PUBLIC DATA

LCD Symbol
HIC
NB
ECHO
10k
RB
: no shift
: shift to bottom
settings and description
receipt tone type; ON / OFF
Noise Blanker; ON / OFF
Echo; ON / OFF
frequency shift +10 kHz; ON / OFF
Roger Beep; 1-8, OFF
25