COLUMBIA VAC CP20 Bedienungsanweisung Seite 10

HOW TO USE THE APPLIANCE
Please read this instruction manual carefully before use and operate the heater properly
After unpacking the appliance, make sure it has not been damaged during transport.
In case of any doubts, do not use the appliance until consulting a service centre.
- Put the appliance onto a flat and stable ground.
- Set the switch (4) to "0".
- Connect the fan to the mains with parameters compliant with those provided in the
instruction.
- Set the angle of the appilance.
- Connect the appliance to a power source with parameters in accordance with the
Instructions for Use.
- To turn the device on, select the mode and speed of operation by rotating the knob (4).
Carry the device around by means of the handle (3) only.
Exercise particular caution when adjusting the angle of an operating circulator.
Do not cover the protective nets (1) and (2) during operation.
10|EN