Bigben Interactive MCD06 Bedienungsanleitung Seite 14

TO INTERRUPT PLAYBACK
Press the CD/Play/Pause
" " will flash. Press the button again to
resume playback.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the skip buttons according to the desired skip direction.
• Playback resumes from the selected track.
• When the button is pressed once during play, the previous track starts again.
• When the button is pressed once during play, the next track plays.
SEARCHING FOR A PASSAGE WITHIN A TRACK
• Keep the or button pressed during playback, and release the button as soon as
you recognize the desired passage. Then normal CD playback will resume from this point.
REPEAT , REPEAT ALL AND RANDOM PLAYBACK
Press PLAYMODE button during stop mode.
CD plays with a single track repeat, all tracks repeat or
randomly.
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT FLASHED >> REPEAT >>
RANDOM >> CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
During Random mode,
display shows
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW,
playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC
performance, writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
CD1E-CD-BIGBEN-GB-TCD07N.indd 6
button and the symbol
CD display
REPEAT
REPEAT
RANDOM
CD display
GB 4
TO STOP PLAYBACK
Press the STOP /CLEAR button and the display shows
the total tracks of the disc.
Press PLAYMODE button during Program mode.
CD plays with a single progam track repeat, all progam
tracks repeat.
FOR NORMAL COMPACT DISC PLAYBACK
Mode sequence REPEAT FLASHED >> REPEAT >>
CLEAR.
During Repeat 1 mode,
display shows
During Repeat 2 mode,
display shows
REPEAT PROGRAM
REPEAT PROGRAM
CD display
2009/9/28 05:18:37