How To Start; Smart Function - Vaporesso Gen Kit Bedienungsanleitung

HOW TO START

Step 1 : Filling the E-juice and install tank.
Uncrew the drip tip directly, then you can
fill your favorite E-juice through the
opening.
1 2
2 English
Step2: Power on the devices
1)Press the fire button for 5 times in 2s: Power on and off.
2)3 continusly pressing fire button to lock and unlock the up ,
down and mode button.
3) 3 continusly pressing mode button to unlock the mode button.
4) When install a tank, it will automatic identify its coil material
and resistance, press up(+) button for reset, down(-) button to
use existing setting.
Step3: Choose your mode
PUL: PULSE mode (default), continues boost flavor with large
cloud.
ECO: POWER ECO mode, to let you have longer battery life.
STC: SMART Temperature control mode, automatic recognize coil
material , just one step to complete setting.
DIY: DIY mode, you can choose traditional VW(H,N,S), VV, VT,CCW,
BP(bypass mode) ,SP( super player mode) from this section.
SET: System setting, including puff counter,brightness, flip screen,
default,version

SMART FUNCTION

• When coil resistance extremely low, it will automatic provide you a option to go to SP (super player) mode.
• When your battery is lower than 40%, it will automatic provide a option to go to ECO(Power ECO) mode..
• When your install the tank with temperature heating wire(SS, Ti, Ni),it will automatic provide a option to go to
STC(Smart TC) mode.
English 3