Werbung
Verfügbare Sprachen
Verfügbare Sprachen
19733 iPad mini wall mount
- Securely Held in Place! The best way to enjoy and use your iPad mini
- The iPad mini clicks into the holder quickly and effortlessly.
- It is secured by 3 drill holes in the wall, ensuring a secure hold
- All iPad mini connections are accessible.
- Can be rotated 360° - it can be positioned horizontally and vertically.
- Rotating is easy, and your iPad mini stays securely in the position you select.
Thank you for choosing this product. The instructions provide directions to all of the important set up and handling steps. We recommend you
keep these instructions for future reference.
SAFETY NOTES
- Carefully clip the iPad mini onto the holding plate and ensure that the iPad mini fit is secure - be careful you when the iPad mini is
positioned.
- The holder is affixed to the wall with three screws. ENSURE:
-
a. Walls, that are too weak or have electrical and water conduits are not suitable. If this is the case consult a qualified handyman.
-
b. Depending on the wall composition (Wood, Concrete, Bricks etc.) use the appropriate mounting materials (not included with the delivery)
-
c. Ensure that the screw and nuts are tight and check this routinely.
WALL MOUNT
The wall mount comes fully assem-
bled and can be mounted to the wall.
1 The three drill holes are to be
1
placed according to the round
1
wall plate:
1
- according to a good estimate
1
- practical know-how
2 Mark the drill holes
3 Drill the anchor holes
3
- ø 6 mm for plastic anchors
3
- if so ø 3 mm for wood anchors
4 Mounting example concrete wall
5 Mounting example wood wall
If the wall is made of aerated
concrete, plaster board etc. we
recommend that you consult a
hardware store to purchase the
suitable anchoring materials.
USAGE NOTES
ALIGNMENT of the iPad mini
6 Place the iPad mini according
6
to the HOME-Button Symbol
6
(consult the embossing on the
6
holding plate)
PLACEMENT of the IPAD MINI
7 First PLACE the iPad mini into
7
the bottom area and then...
8 ...CLIP it into the top
REMOVAL of the IPAD MINI
19
Hold the iPad mini and lift the upper hook
10 Then remove the iPad mini
FORMAT
11 The holder is equipped with a 360°-rotating function. The
11
iPad mini can be placed in any desired position - vertical -
11
horizontal and everywhere in between. The iPad does not
11
have to be removed for the holder.
TECHNICAL DATA
Swivel Bearing: Polyamid PA-6
Material
Holding Plate: PP
Screws, nuts, washers, springs: steel galvanized
Max. load
iPad mini
208,7 x 89,6 x 143,7 mm
Dimensions
Box: 235 x 90 x 171 mm
Weight
net 0.26 kg, gross 0.44 kg
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
19733-000-55 Rev.03 03-80-108-00 6/13
WALL MOUNT mounting example
ALIGNMENT of the iPad mini
Lautstärkeregler
Ein-Aus-
Schalter
Kamera (Rückseite)
Mikrofon
Mikrofon
Kamera (Vorderseite)
3,5 mm
Buchse
Home-Button
PLACEMENT of the IPAD MINI
bottom
PLACE
Stone, concrete
Lightning
connector
Laut-
sprecher
(eine Prägung in der Halterung gibt die AUSRICHTUNG des iPad mini vor)
(falsche Ausrichtung führt zu verdeckten Bedienelementen! Bitte beachten)
REMOVAL of the IPAD MINI
top
CLIP ON
FORMAT
Final Position
Incline Position:
- landscape
- tilted
- click into place
- cannot be clicked into place, however
-
FAULT FINDING (F) & REPAIR (R)
F: Holder is not stable B: Check the wall screws
F: Holder is not stable
B: Check the connection between the wall plate
F: Holder is not stable B:
F:
iPad mini is not firmly in place
F: iPad mini is not firmly in place
Lift up
the hook
it does stay in the selected position
and holder plate
B:
Place the iPad into the holder correctly
(so you can hear the click)
Wood
Remove
Final Position
- portrait
- click into place
Werbung
