Exclusion Of Liability; User Information - Avenger B7018, B7043CS-1, B7047CS-1, B150P-1, B150-1 Bedienungsanleitung

The column must move without any resistance and without any great application of force.
If this is not possible, remove the crankcase and re-fit.
PRECAUTIONS
Do not use the product beyond the defined operating limitations.
Do not tamper with or modify the product or parts thereof as doing so would compromise the product's
operation and/or safety. Using a product that has been damaged, for example due to impact or accidental
falls may compromise its safe use. In such cases, contact your retailer or the manufacturer directly
through the customer service section on manfrotto.com. Dry the product after use in damp conditions
to avoid triggering corrosion especially when using it near marine environments. The product is not
designed to be used immersed in liquids.
The stand must not be left unattended or accessible to non-professionals.

EXCLUSION OF LIABILITY

The information contained in this document may be subject to variations over time.
If necessary, please check for updates to this manual in the Products area of the manfrotto.com web
site or request an updated copy to be sent to you through the Contact us area.
Vitec Imaging Solutions cannot be held liable for any damage that may, directly or indirectly, derive
from people, things or animals, as a consequence of the non-observance of all the instructions in this
document (in particular regarding installation, use and maintenance of the product), as well as injuries
and damages resulting from improper use or use that goes beyond the normal operating limitations.
Any variation or change made to the product without explicit permission from Vitec Imaging Solutions
shall automatically result in the exclusion of any liability on Vitec Imaging Solutions' part.

USER INFORMATION

Product disposal and packaging
Materials used
Stand: The main structure is made of aluminium and steel; rubber protection
Packaging: Paper, cardboard, polystyrene inserts, polyethylene bags
To dispose of the product and its packaging, please refer to the regulations in force in the country in
which the product is being disposed of for the aforementioned materials.
Thank you for purchasing a Vitec Imaging Solutions product.
Vitec Imaging Solutions guarantees that its products are suitable for the purpose for which they were
designed and free from defects in materials and workmanship. This warranty does not cover the
product against damage or improper use.
The duration of the Standard Warranty period is defined by the legislation in force in the country, state
or region in which the product is sold.
Please keep a copy of your product's proof of purchase, as it will be requested in case of repair.
How to extend the warranty coverage
In addition to the mandatory standard cover referred to above, Vitec Imaging Solutions offers a warranty
extension of up to 5 years from this product's date of purchase. The warranty extension does not affect
standard mandatory coverage. To benefit from the warranty extension, you are required to register
your purchase on our web site: https://warranty.vitecimagingsolutions.com.
GB
CONTENT OF EU DECLARATION OF CONFORMITY for B150-1 – B150P-1 – B7047CS-1 -
B7043CS-1
Manufacturer's name: Vitec Imaging Solutions Spa
Manufacture's address: Via Valsugana 100, 36022 Cassola (VI), Italy
Product name: STRATO-SAFE CRANK-UP STD 4 RSR
Product code: B150-1
Product name: STRATO SAFE WITH FILLED WHEELS
Product code: B150P-1
Product name: STRATO SAFE 47
Product code: B7047CS-1
Product name: STRATO SAFE 43
Product code: B7043CS-1
*Please note the B7018 STRATO SAFE 18 does not hold TÜV-GS or CE certification at the time of
this revision to the user manual
GB - Complies with the requirements of the following directives and carries "CE" marking accordingly:
I - È conforme alle seguenti direttive e riporta la marchiatura "CE":
D - Erfüllt die folgenden Richtlinien und trägt „CE"-Zeichen entsprechend :
F - Est conforme aux directives suivantes et porte la marque « CE » en conséquence :
E - Cumple con las siguientes directivas y lleva marca "CE":
Directive 2006/42/EC
Copyright © Vitec Imaging Solutions 2019
The legal entity authorised to compile the technical file is Vitec Imaging Solutions Spa
10
GB