Personal Safety - Arrow PT50 Benutzerhandbuch

General Safety Rules

PERSONAL SAFETY

Always wear eye protection. Operator and others in the work area should always wear
ANSI-approved safety goggles with side shields. Eye protection is used to guard against flying
fasteners and debris, which may cause severe eye injury.
Always wear hearing protection when using the tool. Prolonged exposure to high
intensity noise may cause hearing loss.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be
caught in moving parts.
Safety alert, watch what you are doing and use common sense when
operating a power tool. Do not use tool while tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating the tool may cause serious
injury.
Avoid unintentional firing. Keep fingers away from trigger when not driving fasteners,
especially when connecting the tool to the air supply.
Keep proper footing and balance at all times. Proper footing and balance enables
better control of the tool in unexpected situations.
Do not use on a ladder or unstable supports. Stable footing on a solid surface
enables better control of the tool in unexpected situations.
Make sure the hose is free of obstructions or snags. Entangled or snarled hoses
can cause loss of balance or footing and may become damaged, resulting in possible injury.