Migatronic OMEGA2 Anleitung Seite 11

BASIC II control panel
Remote control:
Choose between internal and external adjustment.
0 = internal
1 = torch control
2 = remote control
The adjusted parameters are saved internally in the
machine when the machine is turned off.
Lock function (under secondary parameters)
Lock/unlock secondary parameters by pressing the 4-stroke
V
key and the key
Welding voltage indicator
6
The welding voltage indicator is illuminated for
reasons of safety and in order to show if there is voltage
at the torch.
Temperature fault
7
The indicator is switched on, when the power source
is overheated.
simultaneously.
11