Beyerdynamic UNITE RP Kurzanleitung Seite 18

18
The transmitter and receiver can only
communicate if the settings mentioned in this
chapter match. Transmitters cannot
communicate with receivers that do not have
the same pairing information. This is shown in the
following diagram:
TP
Group ID 256
Name 1
A
4.1 How to select an audio channel
• If there are several transmitters within one group
ID range, you can select the channel of the
appropriate transmitter on the receiver. Use the
multifunction button
the channel search and select the desired chan-
nel. Confirm your selection by briefly pressing the
menu button
Unite RP | RP-T – Bodypack Receiver
.
TP
Group ID 256
Name 1
A
TP
Group ID 1
Name 2
B
on the receiver to start