Bestplay rebounder Bedienungsanleitung Seite 12

Step1
Lay the Pad (1) upside down. Then insert the upper U-pipe (2) into the Lower U-pipe (3)
to assemble the frame. The position of the holes in the upper U-pipe (2) and the
position of the holes in the lower U-pipe are located in the same side.
Note: The Pad (1) needs to be lifted when assembling the upper U-pipe (2) and the
Lower U-pipe (3).
1
1
Step 2
net (4) at each 4 corners of the frame as shown and put the elastics around the frame.
Note: First attach an elastic at the horizontal direction, then attach another elastic
at the vertical direction.
5
3
1
4
2
11
2
2
3
3
mesh of the
5