Installing Device Drivers; Windows 3.1X And Dos - Teac CD-532EK Handbuch

5. INSTALLING DEVICE DRIVERS

5.1 Windows 3.1x and DOS

The installation routines for DOS and Windows 3.1x are menu driven.
Windows 3.1X
Insert your TEAC CD-ROM Installation disc into your floppy disc drive.
Select the option Execute of Program-Manager in the menu File to
start SETUP.EXE. Input d :\SETUP.EXE and then click OK. Please
replace d with the name of your floppy disc drive (normally A or B).
DOS
Start INSTALL by typing d :INSTALL followed by <CR>. Please replace
d with the name of your floppy disc drive (normally A or B).
Important: To activate the installed drivers you have to reboot your
system. While the system is booting again you should see the following
new lines beside the already known messages:
MSCDEX Version 2.23 MSCDEX Version 2.23 MSCDEX Version 2.23 MSCDEX Version 2.23 MSCDEX Version 2.23
Copyright © Microsoft Corp. 1986-1993 All rights reserved. Copyright © Microsoft Corp. 1986-1993 All rights reserved. Copyright © Microsoft Corp. 1986-1993 All rights reserved.
Copyright © Microsoft Corp. 1986-1993 All rights reserved. Copyright © Microsoft Corp. 1986-1993 All rights reserved.
Drive Drive X X X X X : Driver TEAC-CDI Unit 0 Drive Drive Drive : Driver TEAC-CDI Unit 0 : Driver TEAC-CDI Unit 0 : Driver TEAC-CDI Unit 0 : Driver TEAC-CDI Unit 0
The letter X shows the name which is assigned to your CD-ROM drive.
32 5. Installing Device Drivers